SwitchBlox USA, same SwitchBlox design, made by BotBlox at our new PCBA facility in New York
For technical documentation, please visit the page for the non-USA made version here.
SwitchBlox USA is a tiny form factor ethernet switch with five 10/100 ports, designed for space, weight and power (SWaP) limited applications.
We developed it specifically to address the need for high data throughput inside small internal volumes, a common problem for drones and robots.
SwitchBlox USA has an footprint of 44.5mm (1.75 inches) by 44.5mm (1.75 inches), and runs from a very wide input voltage from 5 to 60V (tolerant up to 65V). All ports are galvanically isolated from each other, and the input voltage.
SwitchBlox USA is the same design as our SwitchBlox board, but fully made in the USA, by BotBlox at our new PCB lab in New York!
This board is the third of our boards to be fully onshored to the USA.
- The boards are manufactured in the USA.
- The active chips are sourced from either Digi-Key, Mouser, or directly from our European distributors
- The passive chips are sourced only from Digi-Key or Mouser
- All passive components are sourced from Digi-Key or Mouser
- The boards are assembled and soldered entirely by us, BotBlox, in our new PCBA facility in New York.
We are able to provide full Certificate of Conformities, Bill of Materials and Traceability statements and even video proof of batch manufacture, since we now manufacture this board ourselves!. Please note, there is no design difference between this board, and our standard SwitchBlox. For datasheets and technical specifications, please refer to the information on our standard SwitchBlox.
BlueUAS Compliance
This hardware is fully NDAA, TAA and "made in USA" compliant and can be used to build BlueUAS compliant UAS systems. Read more about this here.
CUSTOM CABLES
SwitchBlox USA, same SwitchBlox design, made by BotBlox at our new PCBA facility in New York
For technical documentation, please visit the page for the non-USA made version here.
SwitchBlox USA is a tiny form factor ethernet switch with five 10/100 ports, designed for space, weight and power (SWaP) limited applications.
We developed it specifically to address the need for high data throughput inside small internal volumes, a common problem for drones and robots.
SwitchBlox USA has an footprint of 44.5mm (1.75 inches) by 44.5mm (1.75 inches), and runs from a very wide input voltage from 5 to 60V (tolerant up to 65V). All ports are galvanically isolated from each other, and the input voltage.
SwitchBlox USA is the same design as our SwitchBlox board, but fully made in the USA, by BotBlox at our new PCB lab in New York!
This board is the third of our boards to be fully onshored to the USA.
- The boards are manufactured in the USA.
- The active chips are sourced from either Digi-Key, Mouser, or directly from our European distributors
- The passive chips are sourced only from Digi-Key or Mouser
- All passive components are sourced from Digi-Key or Mouser
- The boards are assembled and soldered entirely by us, BotBlox, in our new PCBA facility in New York.
We are able to provide full Certificate of Conformities, Bill of Materials and Traceability statements and even video proof of batch manufacture, since we now manufacture this board ourselves!. Please note, there is no design difference between this board, and our standard SwitchBlox. For datasheets and technical specifications, please refer to the information on our standard SwitchBlox.
BlueUAS Compliance
This hardware is fully NDAA, TAA and "made in USA" compliant and can be used to build BlueUAS compliant UAS systems. Read more about this here.
