BotBlox Custom PicoBlade to RJ45 cable, 8 way
BotBlox
$19.00 - $29.00
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 100 - 999 and get 25% off
- Buy 1000 - 1999 and get 55% off
- Buy 2000 - 2999 and get 60% off
- Buy 3000 or above and get 62.5% off
BotBlox Custom PicoBlade to RJ45 cable, 8 way
This is the BotBlox PicoBlade to RJ-45, 8-way cable, that can be customised with a length from 0.1 to 3 meters. This is the same type of cable that is supplied with all our 10/100/1000Mbps boards, but with a customised length to achieve efficient cabling in your system. These cables are provided as Unshielded Twisted Pair (UTP) cables, and are equivalent to CAT5e ethernet cabling in terms of performance. These these cables terminate in a Molex PicoBlade on one end, and a RJ-45 on the other end. We recommend a minimum length of 0.1 meters for this cable, and a maximum length of 3 meters. This cable is compatible with the following boards in our range.
- GigaBlox
- GigaBlox Nano PicoConn
- GigaBlox Rugged
- GigaStax Rugged
- 10GBlox
- SPEBlox
- UbiSwitch Baseboard (PicoConn)
Please be aware that if you order custom cables along with our boards, your order may take approximately 4 weeks longer to be fulfilled. Please note that custom cables are non-cancelable and non-returnable (NCNR) once the order is placed.
Need a different cable type? Get in touch!
BotBlox Custom PicoBlade to RJ45 cable, 8 way
This is the BotBlox PicoBlade to RJ-45, 8-way cable, that can be customised with a length from 0.1 to 3 meters. This is the same type of cable that is supplied with all our 10/100/1000Mbps boards, but with a customised length to achieve efficient cabling in your system. These cables are provided as Unshielded Twisted Pair (UTP) cables, and are equivalent to CAT5e ethernet cabling in terms of performance. These these cables terminate in a Molex PicoBlade on one end, and a RJ-45 on the other end. We recommend a minimum length of 0.1 meters for this cable, and a maximum length of 3 meters. This cable is compatible with the following boards in our range.
- GigaBlox
- GigaBlox Nano PicoConn
- GigaBlox Rugged
- GigaStax Rugged
- 10GBlox
- SPEBlox
- UbiSwitch Baseboard (PicoConn)
Please be aware that if you order custom cables along with our boards, your order may take approximately 4 weeks longer to be fulfilled. Please note that custom cables are non-cancelable and non-returnable (NCNR) once the order is placed.
Need a different cable type? Get in touch!
